1, before entering the summer, prepare in advance, release the engine, transaxle, transmission, steering machine and other winter lubrication grease, after cleaning according to the provisions of summer lubrication grease.
2, clean the waterway, remove the scale of the cooling system, dredge the heat sink of the radiator. Always check the tightness of the fan belt.
3. Properly adjust the generator regulator to reduce the charging current of the generator.
4, pay attention to prevent engine overheating during the operation, pay attention to the indication reading of the coolant temperature gauge at any time, if the coolant temperature is too high, to take cooling measures. To maintain the amount of coolant, take care when adding to prevent the coolant boiling and causing burns.
5, always check the temperature and pressure of the tire, if necessary, should stop in the shade, until the tire temperature is reduced and then continue to work, shall not use the way of lowering pressure or pouring cold water, so as not to reduce the service life of the tire.
6, often check the braking efficiency, in order to prevent the brake failure caused by the aging of the main pump or pump bowl, expansion deformation and brake fluid vaporization.
7. Adjust the density of battery electrolyte, dreg the vent hole on the battery cover, keep the electrolyte 10-15mm higher than the separator, and add distilled water according to the situation.
8, before homework to ensure sufficient sleep, keep energetic. If you feel mental burnout, lethargy, slow reaction, etc., you should immediately stop and rest, or wipe your face with cold water to perk up your spirits, so as to ensure driving and operating safety.
9. Do a good job of heat prevention and cooling to prevent heat stroke.
The final inspection confirms that all parts are in good condition before being put into normal use.
